|
 |
Q. Where should the temperature/humidity sensor board be mounted? |
| |
A. The sensor/humidity sensor board should be mounted in the return air section
|
|
|
|
Q. How to turn off high humidity alarm |
| |
A. Under Set points->Alarm, set the high humidity to 100% and low humidity to 10%
|
|
|
|
Q. What is the factory setup password? |
| |
A. The factory setup menu is reserved for factory service.
|
|
|
|
Q. How to reset alarm events? |
| |
A. Alarm event will be automatically reset once it has been view and the cause of the event has been corrected.
|
|
|
|
Q. The display unit has no display |
| |
A. Check the telephone cord connection. Verify the cable is a straight through. Check the power input to the micro controller board.
|
|
|
|
Q. Can't turn the unit on through the ON/OFF button |
| |
A. Check the telephone cord connection. Verify the cable is a straight through. Check the power input to the micro controller board.
|
|
|
|
|
|
Q.What do I do when humidity reading behaves abnormal or stuck at 0%? |
|
|
|
|
|
|
